However, it mainly depends on how you use and take care of your electric scooter including the battery.Įlectric scooters are generally reliable, durable, and need very little maintenance. The battery life of your electric scooter can be measured in the form of the number of charging cycles, the number of years, or the total miles. What care can you take to improve the life of your Electric Scooter battery? Verify the battery history, how old it is, and take the help of the battery technician if necessary. If the charged battery does not give its rated output (scooter speed and range miles), the battery needs to be tested.Īn aged battery may lose its voltage fast. The LED on the charger becomes green within a short time of charging.Ĭontinue charging for the recommended duration. If you are in doubt, take the help of a battery technician. Verify the battery history and make sure it’s old and served its life. If the battery’s voltage is low, the battery needs replacement. For instance, the actual voltage of a 36 volts battery can be 38 or 39 volts. The actual voltage of the battery is marginally more than its stated value. If the battery looks fine, test the battery’s voltage. Remove the footboard, examine the battery physically, and look for leakage. A battery charger cannot charge a battery that has reached the end of its life. Check the port with the multimeter and replace the faulty charger.Ĭheck the battery. The charger port may have become loose or there may be a loose connection. If the voltage is zero or less than the battery’s voltage, the charger is faulty and you need a new charger.Ĭheck the mains current and charger port. If the fuse or the circuit-breaker is intact, take the help of a voltmeter or multimeter and test the voltage output of the charger. Your charger may have a built-in fuse or a circuit breaker. When the charger is plugged into the mains, there is no green LED glowing. If there was a mix-up, use the correct charger. Check the printed label on the charger, the voltage of the charger should be marginally higher than the voltage of the battery, such as 39 volts charger for charging 36 volts battery. If you have more than one electric scooter, there can be a mix-up of chargers. However, your battery may sometimes not get charged even after the complete duration of charging. All this happens when everything is working fine. When the battery is fully charged, the LED on the charger will glow green which indicates that the charging is complete and you can remove the charger from your electric scooter. Now, connect the battery end of the charger to the charging port and turn on the power the LED on the charger should glow red indicating that the charging is under progress.Ĭharge the battery for the duration as recommended in your owner’s manual it can be anywhere between 3 to 12 hours. The LED on the charger should glow green, indicating that the charger is good. Take out your battery charger, connect the power end of the charger to an electrical power outlet, and turn the switch on. When you buy through links on our site, we may earn an affiliate commission at no added cost to you.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |